Shall provide single, scrollable window for viewing of all inputs and outputs, audio processing blocks, routing, mix points, and virtual routing.
#Virtual audio cable echo cancellation Offline
Shall provide an Emulate mode for offline configuration.
Shall provide a Live mode for real-time control of parameters without compiling and file uploading to processor.
#Virtual audio cable echo cancellation software
Shall provide PC-based DSP Configurator software allowing flexible control of the digital signal processor’s fixed architecture.
Shall provide a THD+N measurement of less than 0.01% measured at 20 Hz to 20 kHz, at maximum level.
Shall provide an analog in to analog out signal-to-noise ratio of greater than 107 dB measured from 20 Hz to 20 kHz, at maximum balanced output, unweighted.
Audio Device Requirements - Input to Output.
Shall provide additional, deterministic latency of 1.3 ms when Virtual Path routing is used.
Shall provide a maximum, deterministic latency of 3.2 ms from input to output.
Shall provide a 52x44 mix matrix such that all inputs and returns can be discretely routed to any or all of the outputs or sends.
Shall provide 64-bit floating point DSP engine.
Shall provide digital to analog conversion at 48 kHz sampling rate with 24-bit resolution.
Shall provide output attenuation adjustment from 0 dB to -100 dB in 0.1 dB steps, adjustable per output.
Shall support eight mono line level, balanced or unbalanced outputs that accept 3.5 mm captive screw connectors.
Shall provide analog to digital conversion at 48 kHz sampling rate with 24-bit resolution.
Shall provide selectable +48 volt phantom power for condenser microphones on first eight inputs.
Shall provide input gain adjustment from -18 dB to +80 dB in 0.1 dB steps, adjustable per input.
Shall support twelve mono analog inputs that accepts 3.5 mm captive screw connectors:.
12 input, 8 output audio digital matrix processor with digital audio expansion port, automixer function with eight groups, 64-bit floating point DSP engine, four input / four output USB audio interface, macros, 8x4 configurable aux inputs / outputs, 16 virtual processing loops, up to eight audio file players, ACP audio control panel support, and 24-bit/48 kHz audio converters.
Provide an audio digital matrix processor that shall support 12 mono analog inputs capable of microphone or line level signals and 8 mono analog line level outputs for signal routing and management.